Wednesday, August 1, 2007

[BLUG] Hauppauge PVR-150 s-video capture problems

Hello,

Running Kubuntu Feisty.

dmesg | grep ivtv - looks good.

[   13.289761] ivtv:  ==================== START INIT IVTV
====================
[   13.289772] ivtv:  version 0.10.1 (tagged release) loading
[   13.289776] ivtv:  Linux version: 2.6.20-16-generic SMP mod_unload 586
[   13.289780] ivtv:  In case of problems please include the debug info
between
[   13.289785] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[   13.289789] ivtv:  any module options, when mailing the ivtv-users
mailinglist.
[   13.289987] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   13.303122] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   13.981738] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   14.195690] ivtv0: Encoder revision: 0x02060039
[   14.264781] ivtv0: Autodetected Hauppauge WinTV PVR-150
[   14.264784] ivtv0: reopen i2c bus for IR-blaster support
[   14.341285] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   14.505591] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[   17.834563] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[   17.879873] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[   17.880198] ivtv0: Registered device video32 for encoder YUV (2 MB)
[   17.880539] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[   17.880707] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[   18.210495] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[   18.210538] ivtv:  ====================  END INIT IVTV  
====================


With my digital camcorder attached via s-video to the PVR-150 s-video I try

cat /dev/video0 > /tmp/test.mpg

Try to open it in mplayer and get fuzzy black with colour streaks.

ivtv-tune -d /dev/video0 does not help.

If I try cat /dev/video0 > /tmp/test.mpg without pressing play on the
camcorder - I get the same display in mplayer as when I press play on the
camcorder.

Any suggestions how I can get s-video to work?

Thank you,

Peter Brown

_______________________________________________
BLUG mailing list
BLUG@linuxfan.com
http://mailman.cs.indiana.edu/mailman/listinfo/blug

No comments: